Skidsteer Attachments

The Prime Clam Grapple is built for multi-purpose use and it is an absolute beast in action. Use this grapple to clean up brush, dig out roots and large rocks, perform concrete work, move logs, and more!

The Clam/Brush Grapple features a large 52″ bite, is equipped with two 3,000 psi hydraulic cylinders and has a serrated teeth design for clamping power. The replaceable digging teeth make this a popular grapple because of the versatility it brings to the job site. 

• Weld-on push bar included (as pictured)
• Industry leading Omni Gearbox
• Flo Torq standard flow commercial-grade motor
• Rated for trees and saplings up to 3” in diameter
• Professionally spun stump jumper
• Industrial standard hardened blades
• Fully hand welded, commercial-grade decking
• Full length 3/8" runners on the bottom of the skids to drastically extend the life of the mower
• Extra 1/2" motor support & stabilized 

• Fully hand welded commercial grade decking 

• 4 full-length gussets
• Bolt-on removable cylinder cover
• Short and aggressive teeth pattern
• Remove trees up to 12” in diameter
• Optional bolt-on Debris Screen
• Optional bolt-on Push Bar
• Greaseable pivot points
• Universal quick attach plate

• Jaw opening: 17 inches
• Cylinder strength: 3,000 lbs
• Teeth size: 1/2 inch

The Prime Attachments Snow Pusher is an industrial-grade beast of a snow box! This snow pusher is ideal for clearing large commercial lots or long driveways due to its ability to quickly push large amounts of snow.

It comes with a 1/2” adjustable and replaceable cutting edge, as well as 1” replaceable Grade 50 steel shoes. It is built for a beating! We also do the extra material bend in our larger press brake to gain HUGE volume over our competitors (see photos).

• Universal quick attach plate
• Bolt-on removable side plates
• Commercial-grade steel
• Reinforced outside tines
• Greaseable pivot points
• Visibility cut outs on grapple
• Optional bolt-on cylinder covers

• Common sizes: 62",68”,74",78" and 84"
  
• Spacing between tines: 3"
  
• Side plate width: 1/2"
  
• Steel tine width: 3/8"
  
• Grade 50 cutting edge: 1/2"

Four swing-away blades per spindle

Bi-directional motor.

Adjustable 6" Tilling 

72" $1675

78" $1725

84" $1800

• Universal quick attach plate
• Commercial-grade steel
• Greaseable pivot points
• Replaceable digging/excavator performance teeth
• Universal flat face couplers

• Bucket Width is 16" tapered down to 12"
• Length is 63"
• Height is 20"
• Cutting Edge 1/2" Grade 50 Steel
• 3,000 PSI cylinder

Walk through

5500lb

4x4

2inch receiver

 Features

• Direct Drive Motor
• ¼ Decking with extra support gussets
• Massive 417 lb fly wheel
• 4 free spinning blades
• Fully welded double push bar
• Top Access hole for quick and easy blade change out
• Up to 8" Diameter trees
• Motor protection with Hydraulic pressure relief valves and swing away blades
• Open Front designs allows for the quick cutting of larger trees

• Standard Flow 19-25 gallons per minute to operate
• Fully Hand welded with commercial grade steel
• Full warranty - 1 year

• Universal quick attach plate
• Commercial-grade steel
• Greaseable pivot points
• High performance replaceable digging teeth
• Reinforced gusseted grapple tines
• Fully gusseted frame (top & bottom)
• Serrated teeth on clam portion of grapple to hold debris of all kinds

• Common Sizes: 66"; 74" and 82"
• 3/4" Grade 50 steel bottom tines
• 1/2" Grade 50 steel top tines
• Fully gusseted frame top and bottom
• Massive 51" opening to get the job done
• 2x 3,000 PSI Hydraulic Cylinders 

• Reversible bolt-on cutting edge for a much longer life span
• The bucket holds a high volume for large moving capacity
• The bucket is constructed with 3/16" thick steel
• All come with 3/4" x 6" bolt-on reversible cutting edge
• 1/2" support straps throughout
• Universal quick attach plate
• Contact us if you would like a custo
• All come with 3/4"x6" Bolt on Reversible Cutting Edges
  
• 8' Snow bucket holds 1.8 Cubic Yards
  
• Available in 7', 8' widths
  
• End Plate Thickness 5/16"
  
• 1/2" Support Straps Throughout

• Fully Hand Welded 10 Gauge Commercial Grade Steel
• Commercial Grade 2”x6” 3000 PSI Hydraulic Cylinder
• ½ Yard Capacity
• Industry Leading 36” Material Chute
• Easily Removable Material Chute
• Manual Option available
• 2-year structural warranty
• 1-year Cylinder, Hose, and Coupler Warranty
• 48” Wide, 22” Tall, 28” Deep (W/O Chute Attached)

commercial-grade Prime Backhoe will accommodate all of your excavating needs. The professionally engineered buckets come in 12”, 18” & 24” wide sizes.

Each bucket comes with replaceable digging teeth. Both 6 1/2’ & 8 1/2′ Backhoes are available, with a capability of digging 6 1/2′ & 8 1/2′ deep respectively. We protect the cylinder and fittings by placing the cylinder upside down in the frame. All of the pivot gussets are fabricated with 1” Grade 50 hardened steel. Thumb options

• Made with AR400, AR200, and Grade 50 material.
• 5" ball bearings that are triple sealed to protect from the elements.
• 2 cutting edges leading up to the drum to shred anything trying to get through.
• 6,700 in/lb Char-Lynn hydraulic motor housed inside the drum for ultimate protection.
• Ultra hard carbide cutter teeth on drum.
• Get additional control from the direct-drive and powerful motor which only protrudes 2.5" beyond the side plate.
• Crossover relief valves to help dampen shock to the hydraulic system.

Call for price and info.

Hydraulic and manual angle

Standard flow

4-5week lead times

$750 for bobcat 7pin 

$450 universal control box

Check them out at CMP attachment

The rotational torque of the Hydra Grapple is double that of the competition, thanks to powerful dual motors and proven durable slewing drive. Lock valves come standard on all cylinders, meaning hydraulics are not needed after clamping to objects which Get ready for greater profitability, more speed, and less down time. The rotational torque of the Hydra Grapple is double that of the competition, thanks to powerful dual motors and proven durable slewing drive. Lock valves come standard 

full size skid bucket comes standard in 90", and we also offer a mini compatible 60" model

Introducing the CMP Hydra Leveler. A custom commission started the ball rolling, and now we’ve added them to our product arsenal. We utilized our time-tested drum design and hydraulic motor from the Hydra Bucket and stuck it in a leveling bar. Additionally, the drum raises and lowers to your set height as you run the drum. Stop running it, and it raises up leaving a level surface to efficiently grade.

• Compact high torque planetary gearbox
• Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
• 2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
• 5 year gear box and 3 year motor warranty / lifetime shaft pull-out warranty
• Over 30 years design and manufacturing experience
• Easily converted to a Screw Anchor Drive with the addition of our patented ‘Anti Kickback Valve’

• Compact high torque planetary gearbox
• Eaton motor with integrated pressure relief valve eliminating the need for bulky valve blocks while reducing many potential leak points
• 2 Piece shaft design ensures maximum side load ratings without increasing load on bearings
• 5 year gear box and 3 year motor warranty / lifetime shaft pull-out warranty
• Over 30 years design and manufacturing experience
• Easily converted to a Screw Anchor Drive with the addition of our patented ‘Anti Kickback Valve’

GP 6" 8" 10" 12" 14" 16" 18" 24" 30" 36"

Extension 2' 3' 4'

The tree puller’s approximate weight is 450 pounds, and it features Grade 50 steel with premium hardware and other high-quality components. The main pivot pin uses a 1 ½-inch cold-rolled steel shaft inside a 3/8-inch thick sidewall bushing. All the pivot points contain highly accessible grease zerks.

Other key features include:

• ¾-inch thick, fully welded jaws.
• 3-inch by 3-inch square tubing on the main frame.
• 3/8-inch gussets.
• A 6-inch by 6-inch by ¾-inch front spade.
• 8-inch by ¾-inch flat-bar plates 

The tree puller’s approximate weight is 450 pounds, and it features Grade 50 steel with premium hardware and other high-quality components. The main pivot pin uses a 1 ½-inch cold-rolled steel shaft inside a 3/8-inch thick sidewall bushing. All the pivot points contain highly accessible grease zerks.

Other key features include:

• ¾-inch thick, fully welded jaws.
• 3-inch by 3-inch square tubing on the main frame.
• 3/8-inch gussets.
• A 6-inch by 6-inch by ¾-inch front spade.
• 8-inch by ¾-inch flat-bar plates 

The ROG-Series has 2-7/8” tine spacing to catch smaller rocks while excluding dust and dirt. Stinger’s ROG-Series is fitted with a weld-on serrated cutting edge ½” thick. The serrated cutting edge allows for easy digging of rocks and also helps leave a very nice finish with doing grading. Stinger’s ROG-Series comes with 2 grapples that grapple independently to secure uneven loads. The tine design of the ROG-Series is straight at the top and has open ends, which makes moving brush into and out of

The primary features and specifications include:

• 3/8-inch Grade 50 support plates.
• ¾-inch by 6-inch front and rear cutting edges.
• 3 ½-inch by 3 ½-inch by 3/8-inch Grade 50 angle irons.
• Convenient dirt bucket hooks.

We use structural steel materials and a reinforced design to deliver a material bucket that you can count on for job after job. The side step on the attachment makes solo operation safer, and features like a universal mount and cutting edge options enhance versatility.

• 3/16 grade 50 shell
• ¼” sides
• 1/2×4” wear bars
• Weld-on or bolt-on cutting edge options
• Safety step
• Bottom radius support
• Universal skid steer mount

Commercial grade.

Back drag 

inch and a half thick rubber on cutting edge 

Stinger hitch plate with 2in receiver 

• Approx. 360lbs
• ¼” AR200 Tine Material
• 1” Greasable Pivot Shaft (Grapple)
• 2” Pipe Size tube Structural Supports

• 2×6 3000PSI Welded Cylinders (Greaseable)
• Multiple Hydraulic Coupler Options
• Enclosed Back- Visibility Cutouts
• Independent Grapples-Secure Uneven Objects
• Approx 35” Grapple Opening
• Mount Plate Options – Secured with (8) Gr8 Bolts
• Approx 9” Opening Between Bucket tines

• ¼” grade 50 steel shell
• ¼” grade 50 steel sides
• 1/2×4” wear bars
• 3/4×8” weld-on edge
• Romac pin-on teeth
• Safety step
• Bottom radius support
• Universal skid steer mount

Comes with 24" removable shute 

Hydraulic gate

865-965#
4” Cut Capacity
3/16 thick deck (1/4” sides)
2 Blade Holder (Triangle)
3/4” Thick Hardened Blade Holder
775-925 RPM
Geroler Motor
Direct Drive
Flow Required – 10-27 gpm
No Case Drain Required

1400-1850#
6” Cut Capacity
1/4 thick deck (1/4” sides)
3 Blade Holder 60″ (Triangle)
4 Blade Holder 72” & 78” (Square)
3/4″ Thick AR400 Blade Holder
725-925 RPM
Geroler Motor
Direct Drive
Flow Required
Standard Flow 15-25 gpm
High Flow 25-35 gpm
No Case Drain Required-Standard Flow
Case Drain Required-High Flow

1550-2000#
7” Cut Capacity
1/4 thick deck (1/4” sides)
3 Blade Holder 60″ (Triangle)
4 Blade Holder 72” & 78” (Square)
1″ Thick AR400 Blade Holder
725-925 RPM
Geroler Motor
Direct Drive
Flow Required – 15-25 gpm
No Case Drain Required

1550-2000#
7” Cut Capacity
1/4 thick deck (5/16” sides)
3 Blade Holder 60″ (Triangle)
4 Blade Holder 72” & 78” (Square)
1″ Thick AR400 Blade Holder
725-925 RPM
Gear/Piston Motor
Direct Drive
Flow Required – 17-45 gpm
Case Drain Required

2500-2600#
7-8” Cut Capacity
3/8 thick deck (1/2” sides)
3 Blade Holder 60″ (Round)
4 Blade Holder 72” & 78” (Round)
1” Thick AR400 Blade Holder
775-925 RPM
Piston Motor
Direct Drive
Flow Required
Standard Flow 17-45 gpm
High Flow 25-45 gpm
Case Drain Required

Features, & Pricing
Video Overview
Shipping & Taxes
Warranty & Returns
Reviews (0)
Features
2350-2600#
14” Cut Capacity
3/8 thick deck
3 Blade Holder
48” – 6 Inner teeth/18 outer
60” – 12 inner teeth/24 outer
1” Blade Holder Thickness
1400-1100 RPM
Piston Motor
Direct Drive
Flow Required
Standard Flow 17-35 gpm
High Flow 35-45 gpm
Case Drain Required

475#
11” Cut Capacity
1/2 Thick Deck
24 Carbide Tipped Teeth
Gear Motor
Direct Drive
Flow Required
Standard Flow 16-29 gpm
High Flow 30-45 gpm
Case Drain Required

Meet the Mix & Go Concrete Mixer attachment series for skid steers and mini skid steers. Scoop up material, mix it while stationary or on the move, and then dispense it with one of three methods. These attachments will save you time on small and medium sized pours, and make you think twice about bringing in a truck.

Breaker Style Post Drivers for Skid Steers and Excavators - A category invented by Eterra over a decade ago. Install posts faster and more efficiently, with less vibration and noise to the machine and operator. Packed with features like 15 degree tilt and breaker tool allowing you to install posts in any conditions.

Introducing a revolutionary attachment that expands the skid steer mower category. The Raptor Boom Arm Mower Attachment delivers unmatched reach and versatility to operators. Featuring five different mower head options including rotary mowers, flail mowers, and sickle bar mowers.

The Vortex Stump Grinder features a high torque output radial piston motor which is highly efficient, converting close to 95% of the hydraulic energy into horse power. The direct drive system is an oil bath enclosed hub system, meaning there are no external couplers and nothing to grease. The asymmetrical high strength alloy steel wheel provides great visibility and features replaceable teeth, rock guards, and abrasion resistant wear plates.

Constructed of A572 Grade 50 high strength steel, and a fully welded chassis. It uses 3"x4" tubing and 1/4" reinforced decking, all fully integrated and welded into the mounting plate. This robust design allows maximum transfer of force and lets the user to use the mower to push and power through tough jobs. AR500 Skid Shoes allow the user to mow right across the ground as well without fear of damaging the frame.

The Eterra Stump Planer is ideal for operators who want a stump removal attachment but can't quite justify the cost of a dedicated grinder. Available in 10" and 14" options, this compact attachment works with many different auger drives on skid steers or excavators and allows you to bore stumps down below ground level. For operators already using an auger drive, this attachment adds tremendous utility at a low investmen

The 4 Foot Trencher is driven by the same proven, top of the line motor that is used on the Eterra Auger, providing a continuously high degree of power to the chain. 18" discharge auger clears the dirt and a pre-assembled crumber bar keeps the trench clean. An easy manual side shift mechanism allows for off-center trenching. Flow rating of 14-23 GPM.

The Eterra Sickle Bar Mowers feature an open face cutter design with rock guards, and are able to cut up to 2" material. The tough serrated teeth are affordable and easy to replace when worn or dulled.The Eterra Sickle Bar Mowers feature an open face cutter design with rock guards, and are able to cut up to 2" material. The tough serrated teeth are affordable and easy to replace when worn or dulled.

The ES HD Brush Cutter is perfect for clearing land, debris, brush, fence rows, and small to medium sized trees up to 8 inches. These are designed to be run in standard flow. If you are wanting to run this unit in high flow,  please call our office to discuss possible options.

Specs

• 1/4” steel deck plate with extra heavy duty push bar
• Open front face design
• 2” drive shaft
• 3 hardened steel blades- 5″ x 1/2″
• Grease filled drive, with greaseable zerk fittings
• 160 cc motor for machines 15-26 GPM
• Steel runne

Specs

• 1/4” steel deck plate with extra heavy duty push bar
• Open front face design
• 3-1/2” drive shaft
• 3 hardened steel blades- 5″ x 1/2″
• Grease filled drive, with greaseable zerk fittings
• 250 cc motor for machines with 27+ GPM
• Steel runners on each side for ease of use over multiple terrains
• Comes with ¾” hydraulic hoses and heavy duty ½” ISO flat faced couplers
• Weight: 1530 lbs.

The ES 60″ Brush Cutter is perfect for clearing land, debris, brush, fence rows, and small to medium sized trees up to 4 inches. These work only on standard flow – DO NOT USE ON HIGH FLOW!

Specs

• 3/16” steel deck plate with extra heavy duty push bar
• open front face design
• gear box drive
• stump jumper
•  hardened steel high-lift blades
• 100 cc motor
• steel runners on each side for ease of use over multiple terrains
• comes with ¾” hydraulic hoses and heavy duty ½” ISO flat faced couplers
• weighs 750 lbs.

250cc motor standard flow

Poly/wire brush

Universal switch to go from angle to brush

Standard flow

Bolt on cutting edge

Grease able bearing 

1/4” steel deck plate with 1/2″ reinforcements
Piston drive motor – choose between 150CC, 200CC, & 250CC (based on machine GPM)
Open front face design
Features a case drain – your machine must have a case drain as well
(4) drop down style blades (5/8″ thick)
Grease filled drive with greaseable zerk fittings
Replaceable & adjustable bolt-on shoes for ease of use over multiple terrains
Comes with ¾” hydraulic hoses and heavy duty ½” ISO flat faced couplers
Weight: 1900 lbs.

35 ton

Single wedge

Standard flow

Mounts $500

3 blades

Bi-directonal 

No case drain required 

Forget the hassle of lugging around heavy attachments and let Auger MAX™ handle the load! Get yours today and make transporting your attachments a piece of cake!

Built for Standard Size Skid Steer Attachments

Holds:

• Hydraulic Auger Drive or Breaker
• Up to Three Standard Length Auger Bits

(Auger Bit Combos: 10", 12", 18" | 18" & 30" | or up to a 48" Single)

• One Standard Skid Loader Bucket (Smooth or Tooth)
• Pallet Forks - Pockets on all 4 sides for Moving or Storage
• Plenty of D-Rings 

The Grapple PRO is Large and Robust, designed specifically for Large Heavy Attachments.

Including a Grapple Bucket, Land Plane, Power Broom, or other large attachment on top shelf which measures 47" x 47"

Also holds:

• One Standard Skid Loader Bucket (Smooth or Tooth)
• Auger Drive or Hydraulic Breaker on internal shelf inside the lower bucket.
• Up to Three Standard Length Auger Bits

(Auger Bit Combos: 10", 12", 18" | 18" & 24" | or up to 36" Single)

• Pallet Forks - Pockets on all 4 sides for Moving or Stora

• Auger Drive or Hydraulic Breaker on top.
• Up to Three Standard Length Auger Bits

(Auger Bit Combos: 10", 12", 18" | 18" & 24" | or up to 36" Single)

• Two Standard Skid Loader Buckets (Smooth or Tooth)
• Multiple, Mini Excavator Buckets (47" Combined Max Width Per Shelf)
• Pallet Forks - Pockets on all 4 sides for Moving or Storage
• 2-4 Hand Tools in the Two Vertical Storage Tubes
• Chains & Boomers - Two Latching Racks
• Lots of Miscellaneous items on the Two Internal Storage Shelves

Top Shelf L-24" W-47" H-17.8"

Bo

• Two Standard Skid Loader Buckets
• Multiple, Mini Excavator Buckets (47" combined max width per shelf)
• Hand Tool Storage for the Whole Crew!
• Pallet Forks - Pockets for Moving or Storage (All four sides)
• Chains & Boomers - Two Latching Racks
• Lots of Miscellaneous items on the Two Internal Storage Shelves

Top Shelf L-24" W-47" H-11.5"

Bottom Shelf L-24" W-47" H-17.5"

Overall Dimensions: 60 x 48 x 55 in
Weight: 850 lbs.

Top Shelf: 48 x 39.5 in Deep

Internal Storage: 58 x 35.5 x 38 in

• Mini-Skid Auger Drive or Hydraulic Breaker
• Up to Three Auger Bits

(Auger Bit Combos 24", 12" | 12", 10", 6" | Up to a 32" Single)

• Two Mini-Skid Buckets
• Multiple, Mini-Excavator Buckets (37" Combined Max Width per shelf)
• Pallet Forks - Pockets on all four sides for Moving or Storage.
• 2-4 Hand Tools in Tow Vertical Storage Tubes.

Can Cut Trees up to 10″ in Diameter
All-Terrain Flywheel Design
Quick-Stop Quad Blade System
Removable and Adjustable Push Bar
Replaceable Deck Runners
Available Models: 85″ and 77″ Wide

• Industry-Best Motor & Bearing Combination
• Superior Hose Management System
• Optimized Tooth Pattern Design for MAXIMUM Cutting Force
• Fastest Recovery Time of any Disc Mulcher on the market
• 35+ GPM Minimum Required
• Super Drive now available for loaders with 40 plus GPM & 4000 plus PSI
• Available Models: 79″ Wide

Motor Protection System with Integrated Safety Brake
Multiple Quadco Teeth Options
Self-Regulating Variable Displacement Motor
Exclusive Hose Management System
Replaceable Skid Shoes & Abrasion-Resistant T1 Steel Zoned Liner
23-50+ GPM Required
Available Models: 50", 60″, and 72" Wide

Fully Adjustable within 180° angle
Offset Boom for Visibility and Safety
Over 24" Diameter Cut Capacity
Motor-Bearing Options
Plug and Play In-Cab Controls
Optional 5 Gal. Integrated Herbicide System

Integrated Comb for Precise Back-Drag and Leveling

84"